Speed Cement Ltd

Cement Concrete Wall Panel Jointing Mortar

It is a high-quality Premixed mortar specially designed for fixing Cement Concrete Wall Panels (precast). This mortar does not require any curing post application.

FEATURES AND BENEFITS

  • Formulated to comply with Indian Standards IS 15477:2019 (Type 4) / EN 12004 C2TE
  • Compatible Flexible Mortar…. crack resistant
  • Improved adhesion between two Panels
  • Water resistant
  • Consistent Quality
  • Modified with Elastomeric agents

RAW MATERIALS USED

Main Binder : Ordinary Portland Cement – Grey

Fine Aggregate : Graded Silica Sand (Max. Size of Aggregate: 1.2mm ; retension on 600 micron sieve is max 5% ); silt free

Polymers :
a) Redispersible Powder ……..helps in better adhesion
b) MHEC (Methyl Hydroxyethyl Cellulose) …. Self-Curing compound
c) Elastomeric agent ..Brings flexibility; has crack resistant properties (RDP and Elastomeric agents sourced from Wacker, Germany)
d) Accelerator

Data

Colour                                   :               Grey

Bulk Density                       :               1450 -1550 Kg/CuM

Coverage                             :               Approx. 1.5 kg/Sqm/mm on plain surface

Pot Life                                 :               60 mins

Open Time                          :               30 mins

Compressive Strength   :               32-35 Mpa , 28days                        

Shelf Life                              :               6 Months

 

SURFACE PREPARATION

Dust layer, if any on the surface of the panel joints must be wiped.

The Surface of Panel Joints/Edges should be pre-wet prior to the application i.e. Pre-wetting is required so that the Panel joint surfaces does not absorb moisture from Mortar.

MIXING AND APPLICATION

Approx 22% water (by weight of material) is required for mixing. Mixing can be done either manually or with mechanical mixer / stirrer. It is advisable to use a mechanical Mixer to get homogeneous mix. The material should be applied within 90 minutes after preparation. It is recommended to apply Mortar with a suitable Trowels.

CURING

No curing is required for Panel Joints after the application. Natural air curing is enough.

STORAGE AND PACKING

Panel Jointing Mortar is supplied in dry form and delivered in 40 Kg bag. Storage life is Six months if the product is stored in a dry place.

HEALTH AND SAFETY

Recommended to wear NIOSH approved or equivalent particulate face mask when mixing the material.

Material contains cement, which may produce allergic effect.

Keep out of reach of children.

Avoid contact with eyes and prolonged contact with skin.

DISCLAIMER

It is assumed that all standard Civil Engineering Practices shall be adopted for application of the mortar. The information given in this leaflet is for general guidance.

Scroll to Top